353 found, showing page 6 of 9
$49.38
3pk ASST CARBIDE BLADE DIABLO
3PK ASST CARBIDE BLADE
View Details
$11.49
3/8" KEYHOLE ROUTER BIT
For making keyhole slots for picture frames, shelves, mirrors, cabinets, support fixtures, and more. Carbide tipped. 1/4" shank. 3/8" outer diameter, 7/16" cutting length.
View Details
$8.99
*ASST MULTI-MAX SANDPAPER
For sanding wood. Bare wood, hardwood, soft wood, and chipboard. Includes: 2 each of 60, 120, and 240 grit.
View Details
$8.99
*ASST MULTI-MAX SANDPAPER
For sanding paint. Varnish and paint removal. Includes: 2 each of 80, 120, and 240 grit.
View Details
$11.99
DREMEL 15/16" CUTOFF WHEEL
For cutting metal with limited use on wood and plastic. Cut-off wheel makes it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Use with mandrel 402.
View Details
$6.49
DREMEL COMPOUND POLISHING
For use with polishing wheels. Brings a high luster to metals or plastics. 1 oz. vial.
View Details
$20.99
5/32" ROMAN OGEE BIT
For decorative edging and period furniture. 1/4" shank. 1/4" bearing.
View Details
$7.99
SANDER DRUM 1/4" dremel
Sanding drum mandrel holds a sanding band covered with aluminum oxide abrasive. For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces. 1/8" shank. Sanding bands are easily replaceable on drums. Includes 1 coarse, 60 grit sanding band.
View Details
$18.99
3/16" EDGEBEAD BIT
For decorative edging and window sash. 1/4" shank. High-speed steel. 1" shank length.
View Details
$4.99
*COLLET 1/32"
For Moto-Tools model No. 260 Series 55-3, model No. 270 Series 66-2, and model No. 280 Series 66-2.
View Details
$10.49
*WHEEL ABRASIVE 1"MED
Aluminum oxide. For cleaning, deburring, polishing metal and stainless steel. Medium grit. 1/8" shank.
View Details
$11.29
BIT ROUTER STRAIGHT 3/16"
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
View Details
$11.99
DREMEL BIT ROUTER
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
View Details
$4.79
6PK 1/4"CRSE SANDER BAND
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$4.79
*BAND SANDER 1/4" FIN
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
TUNGSTEN CARBIDE CUTTER
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
*TUNGSTEN CARBIDE CUTTER
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$17.99
CUTTER TUNG CARBIDE
Fast cutting needle-sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, and rubber. 1/8" shank.
View Details
$16.99
CUTTER TUNG CARBIDE
Fast cutting needle-sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, and rubber. 1/8" shank.
View Details
$52.99
SINGLE SPEED MOTO-TOOL
Single speed, ideal for sanding, carving and drilling. Long-life, lubricated bronze sleeve bearing motor provides steady power, smooth operation. 1/8" quick change collet. Tapered shape for comfortable control. Double insulated motor, no grounding required. 6' 2-wire cord. Includes 402 mandrel, 407 1/2 In. (inch) coarse sanding drum, 415 dressing stone, 420 heavy-duty emery cut-off wheel, 432 1/2 In. 120 grit sanding band, 932 aluminum oxide grinding stone, 84922 silicon carbide grinding stone.
View Details
$11.99
1/2X1 FLUSH TRIM BIT
Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long-lasting performance. Triple tempered shanks for maximum durability.
View Details
$16.49
3/8X9/16 FLUSH BIT
Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long-lasting performance. Triple tempered shanks for maximum durability.
View Details
$14.49
TOP MAT non slip
Protects against scratches, nonslip work surface. Strong fiber reinforced material and can be washed. Can be cut with scissors to fit. Size: 17-3/4" x 26-1/4" roll. Can hang or merchandise on a shelf. Toolbox and tools not included.
View Details
$234.00
*KIT PLATE JOINER
Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time. Integral one-piece fence is adjustable and tilts 0-90 deg (degree). Flush cuts can be made at 0 deg without removing fence. 45 deg (degree) locating notch in fence allows indexing off the outside surface of a mitered joint. Non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work. Retractable, anti-slip pins help hold work in place. Preset depth stops for all common biscuit sizes. Includes carbide blade, dust bag, vacuum adapter, Torx key, wrench, soft side bag.
View Details
$119.99
8" BENCH GRINDER
Bench grinder with lights. Induction motor for quiet, smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. Pre-drilled heavy-duty cast iron base. Includes two wheels and two light bulbs.
View Details
$23.99
3" CRIMPED CUP BRUSH
Use on angle grinder for fast removal of rust corrosion and spatter. Use to clean weld beads, angle weld, and corners in tight places. For roughening, deburring, and surface cleaning prior to welding. Direct spindle mount on angle grinder.
View Details
$6.29
DREMEL CUTTER ENGRAVING
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials. All have 1/8" shanks.
View Details
$6.39
DREMEL WHEEL FELT POLISHING
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound. Perfect for general polishing of most ferrous metals, stones, glass and ceramics. Felt polishing bobs can be used with or without polishing compound. Self-renewing surface ensures that the felt polishing cone maintains its effectiveness. Ideal for polishing in corners and hard-to-get-at places. Fits mandrel Model No. 401.
View Details
$5.99
WHEEL FELT POLISHING
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound. Perfect for general polishing of most ferrous metals, stones, glass and ceramics. Felt polishing bobs can be used with or without polishing compound. Self-renewing surface ensures that the felt polishing cone maintains its effectiveness. Ideal for polishing in corners and hard-to-get-at places. Fits mandrel Model No. 401.
View Details
$5.49
6PK 1/2"FINE SANDER BAND
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$89.99
*4-1/2" 7A ANGLE GRINDER
Compact and lightweight design. The 4-1/2" Angle Grinder is the smallest in Milwaukee's extensive grinder line and is the only tool in its class with a tool-free burst-resistant guard. The built-in advanced airflow system includes Debris Baffles and Multi-port exhaust, extends tool life. 7.0A, 5/8" to 11" spindle thread.
View Details
$154.99
M18 CUT-OFF BARE TOOL
The M18 cordless 4-1/2" cut-off/grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee 4-pole motor, delivers maximum power when cutting or grinding. The only cordless cut-off/grinder in the market to provide the user-preferred paddle switch for comfort and ease-of-use when operating in various positions. L-shaped intake vents protect the cut-off/grinder by keeping harmful debris from entering the tool and damaging internal components. Includes 3-position side handle, type 1 guard, type 27 guard, spanner wrench. Bare tool - battery and charger not included.
View Details
